2-in-1 moisture meter.
Pin & pinless.
Two measurement modes, 9 calibrated wood species, tri-color LED alert. Pro accuracy for wood, walls, and screeds.
- Pin + pinless
- 9 calibrated species
- Tri-color LED
- CE · UKCA · RoHS
01Built for pros and serious DIYers
Measure moisture, for real.
Not a €9 device that misreads by 8 %. Calibrated, normed, tri-color.
2 modes in 1
Pin mode for absolute accuracy (±2 %), pinless mode for non-destructive measurement.
9 calibrated species
Fir, oak, beech, pine, maple… quick select via the DENSITY button.
Tri-color LED alert
Green = dry, Yellow = borderline, Red = wet. No graph to read.
Temperature reading
±2 °C accuracy, °C / °F toggle. To qualify the environment.
02How it works
Four steps. Reliable measurement.
- STEP 1
Power on
Press the Power button. The display lights with tri-color backlight based on the detected moisture level.
- STEP 2
Pick the mode
Choose pin mode for absolute accuracy (probes into the wood) or pinless mode to measure without leaving a trace.
- STEP 3
Calibrate the species
DENSITY button to select among the 9 pre-calibrated species (fir, oak, beech, pine…).
- STEP 4
Measure
Place the device on the material. Moisture displays in %, the LED changes color based on threshold.
03Who it's for
Built for four use cases.
Firewood
Measure moisture content of your logs before use. Dry wood = clean burn and max yield.
Wall diagnosis
Identify moisture zones in walls, ceilings, partitions. Before real estate purchase or to anticipate damage.
Carpenters
Check wood moisture before gluing, varnishing, or cutting to avoid deformation.
Water damage
Diagnose residual moisture in screeds, parquet, partitions after leak or flood.
04Specifications
Full spec sheet.
CE and UKCA certified. Built for daily jobsite use.
- Reference
- EMR-H01
- Measurement modes
- Pin + pinless
- Wood range (pin)
- 6 to 60 %
- Materials range (pin)
- 0 to 33 %
- Pin accuracy (wood)
- ±2 %
- Pinless accuracy (wood)
- ±4 %
- Resolution
- 0.1 %
- Calibrated species
- 9 wood species
- Temperature
- ±2 °C · °C / °F toggle
- Display
- VA LCD + tri-color backlight
- LED alert
- Green / Yellow / Red by threshold
- Power
- 1 × 9 V battery (PP3)
- Auto-shutoff
- 5 minutes
- Dimensions
- 189 × 68 × 35 mm
- Weight
- 171 g
- Certifications
- CE · UKCA · RoHS
- Warranty
- 24 months
- What's in the box
- Moisture meter, neoprene pouch, manual, 9 V battery, QR card (manual in 5 languages)
05FAQ
Everything answered.
What is the difference between pin and pinless modes? +
Pin mode uses two metal probes pushed into the material to measure electrical conductivity, accurate to ±2 % but leaves two tiny pinholes. Pinless mode uses a spherical contactless sensor, convenient for surfaces you do not want to damage, ±4 % accuracy.
Which materials can I use it on? +
The EMR-H01 measures wood moisture (9 calibrated species) with a 6 to 60 % range in pin mode. It also measures construction materials (plaster, cement, brick, screed) between 0 and 33 %.
At what moisture level can firewood be burned? +
Below 20 % for optimal yield. Ideally between 12 % and 17 %. The EMR-H01 green LED lights below 12 %, yellow between 12 and 15.9 %, and red above 16 %.
Is the 9V battery included? +
Yes. The EMR-H01 ships ready-to-use with an alkaline 9 V battery (PP3) included. The battery provides around 200 hours of normal use.
What's in the box? +
The kit includes the EMR-H01 moisture meter, a neoprene carrying pouch, a printed manual, a 9 V battery, and a QR card that links to the multilingual online manual (EN, FR, DE, IT, ES).
How do I check the device is properly calibrated? +
A calibration plate is built directly into the protective cap. Insert the pins into the 2 holes on top of the cap: a reading of 18.6 % ± 2 % confirms the device is calibrated and working. No external accessory needed.
Available now
Ready to measure right?
The EMR-H01 is now available on Amazon France with Prime delivery, easy returns, and a 24-month EMROC warranty.
- Prime delivery
- 24-month EMROC warranty
- 9 V battery included